NS-HWG1955E-C_18-0256_MAN_V2_TRI-LANG.fm Page 6 Wednesday, April 25, 2018 9:12 AM
Assembly instructions
Step 1: Preparing the top, bottom, side panels, and front
Caution: Assemble your stand on a carpeted floor or on the empty box to avoid scratching your stand.
• Screw 29 cam screws (1) into the holes in the top (A), bottom (G), sides panels (B and C), and front (H),
then tighten with a phillips screw driver until the smooth portion of the cam screw is flush with the
surface of the part. Use the holes indicated.
You'll need:
6
NS-HWG1955E/NS-HWG1955E-C/NS-HWG1955B-C
Phillips screwdriver
www.insigniaproducts.com
1 Cam screw (29)