NS-HWG1955E-C_18-0256_MAN_V2_TRI-LANG.fm Page 8 Wednesday, April 25, 2018 9:12 AM
Step 3
Attaching the front to the bottom/panel assembly
:
1 Lay the bottom/panel assembly on its back, as shown, then insert three hidden cams (2) into the large holes in
the long sides of each side panel (B and C), two in the sides of each middle panel (D and E), and three in the
bottom (G).
2 Insert two wooden dowels (11) into the small holes in the front edges of each side panel (B and C) and two in
the front edges of each middle panel (D and E).
3 Align the front (H) with the bottom/panel assembly and push the cam screws into the holes with the hidden
cams on the bottom/panel assembly.
4 Tighten each hidden cam with a Phillips screwdriver as tight as possible (about 180°).
You'll need:
8
NS-HWG1955E/NS-HWG1955E-C/NS-HWG1955B-C
Phillips screwdriver
www.insigniaproducts.com
11 Wooden dowel (8)
2 Hidden cam (13)