Maintenance And Cleaning - IKA Vacstar digital 112017 Instrucciones De Manejo

Accessories: PC 1.1 cable (device to PC)
Required for connecting the 9-pin socket to a PC.
1
6
2
7
3
8
4
9
5
1
RxD 2
TxD 3
4
GND 5
6
RTS 7
CTS 8
9
USB A - USB B cable
Required for connecting the USB interface (L) to a PC.
USB B
Connecting cable MVP 10.100
Required for connecting VC 10 and RV 10 auto with the diaphragm vacuum pump IKA Vacstar digital (speed operation).
The device is maintenance-free. However it is subject to natural
wear and tear on parts and their statistical failure rate.
Unplug from the mains before cleaning.
Only clean the IKA device using these IKA-approved cleaning
agents:
Dirt Cleaning agent
Dyes Isopropyl alcohol
Building materials Water containing detergent, isopropanol
Cosmetics Water containing detergent, isopropanol
Food Water containing detergent
Fuels Water containing detergent
Other materials Please ask IKA
• Wear protective gloves when cleaning the devices.
• Do not place electrical appliances into the cleaning agents for
cleaning purposes.
• Ensure no liquid enters the device during cleaning.
• Please consult with IKA before using any cleaning or
decontamination methods not specifically recommended.
28

Maintenance and cleaning

Ordering spare parts
When ordering spare parts, please make sure to indicate the
following:
•
•
•
Repairs
Please only send devices in for repair that have been
cleaned and are free of materials which might present
health hazards.
For this, use the "certificate of compliance" form which you
can obtain from IKA or can download a version for printing from
the IKA website www.ika.de
If your appliance requires repair, return it in its original packaging.
Storage packaging is not sufficient. also use appropriate transport
packaging.
Device type
Device manufacturing number; see rating plate
Reference number and description of spare part; see spare
part diagram and list at www.ika.de.
5
9
4
8
3
7
2
6
1
1
2 RxD
3 TxD
PC
4
5 GND
6
Fig. 10
7 RTS
8 CTS
9
USB A
Fig. 11
Fig. 12