Moving The Wet/Dry Vac; Blowing Feature - RIDGID 1620RV0 Manual Del Usuario

SP6953 Ridgid 1620RV0_SP6542.qxd 1/16/15 10:00 AM Page 11
Operation (continued)

Moving the Wet/Dry Vac

Should it become necessary to pick the
Vac up to move it, the handles on the
sides of the dust drum are used to lift.
To maneuver the Vac, the handle above
the inlet can be used.

Blowing Feature

Your Wet/Dry Vac has a "detachable
blower." It has the capability to be used
as a dedicated blower for yard work,
patio cleanup, and garage applications
to blow dust and other debris.
WARNING: Always wear safety
eyewear complying with ANSI Z87.1
(or in Canada, CSA Z94.3) before
using as a Blower.
WARNING: To reduce the risk of
injury to bystanders, keep them
clear of blowing debris.
CAUTION: Wear a dust mask if
blowing creates dust which might
be inhaled.
CAUTION: To reduce the risk of
hearing damage, wear ear protectors
when using the Vac/Blower for
extended time or in a noisy area.
1. Familiarize yourself with the detachable
blower portion of your Wet/Dry Vac.
2. Remove the detachable blower of
your Vac by pressing down on the
detachable blower latch under the
handle of the detachable blower and
lift by the handle to remove.
Detachable
Blower
Latch
11
Detachable
Blower Handle
Detachable
Blower
Molded
Leads