Protecting The Environment - DeWalt D25601 Manual De Instrucciones

MAINTENANCE

WARNING: To reduce the risk of serious personal
injury, turn unit off and disconnect it from
power source before making any adjustments or
removing/installing attachments or accessories.
An accidental start-up can cause injury.
Your D WALT power tool has been designed to operate
e
over a long period of time with a minimum of maintenance.
Continuous satisfactory operation depends upon proper
tool care and regular cleaning.
Lubrication
Your tool was properly lubricated before leaving the
factory. In from two to six months, depending upon use,
take or send your tool to an authorized service center for a
complete cleaning, inspection and lubrication. Tools used
constantly on production jobs will need relubrication more
often. Also, tools "out of service" for long periods should be
relubricated before being put back to work.
Cleaning

WARNING: Blow dirt and dust out of all air vents with
clean, dry air at least once a week. To minimize the
risk of eye injury, always wear approved eye protection
when performing this.

WARNING: Never use solvents or other harsh
chemicals for cleaning the non-metallic parts of
the tool. These chemicals may weaken the plastic
materials used in these parts. Use a cloth dampened
only with water and mild soap. Never let any liquid
get inside the tool; never immerse any part of the tool
into a liquid.
Accessories

WARNING: Since accessories, other than those
offered by D WALT, have not been tested with this
e
product, use of such accessories with this tool could be
hazardous. To reduce the risk of injury, only D
recommended accessories should be used with
this product.
Recommended accessories for use with your tool are
available at extra cost from your local dealer or authorized
service center.
Repairs
The charger and battery pack are not serviceable.

WARNING: To assure product SAFETY and
RELIABILITY, repairs, maintenance and adjustment
(including brush inspection and replacement) should
be performed by a D WALT factory service center
e
or a D WALT authorized service center. Always use
e
identical replacement parts.

Protecting the Environment

Separate collection. Products and batteries
marked with this symbol must not be disposed
of with normal household waste.
Products and batteries contain materials that can be
recovered or recycled reducing the demand for raw
materials. Please recycle electrical products and batteries
according to local provisions.
Voltage
Frequency
Power Output
No Load Speed
Impact Energy
Impact per Minute
Max Drilling Capcity
Weight
Voltage
Frequency
Power Output
No Load Speed
Impact Energy
Impact per Minute
Max Drilling Capcity
Weight
WALT
e
Voltage
Frequency
Power Output
Impact Energy
Impact per Minute
Weight
* According to EPTA Procedure
spECIFICaTIoNs
D25601
B3
120 V~
50-60 Hz
1200 W
210 - 415/min (rpm)
8 J (5,9 ft/lbs)*
1430 - 2830 IPM
1-3/4" (45 mm)
13,6 Ibs (6,2 Kg)
D25604
B3
120 V~
60 Hz
1250 W
210 - 415/min (rpm)
8 J (5,9 ft/lbs)*
1430 - 2840 IPM
15/32" - 1-3/4" (12 mm - 45 mm)
15,2 Ibs (6,9 Kg)
D25831
B2
220 V~
50-60 Hz
1200 W
8 J (5,9 ft/lbs)*
1430 - 2840 IPM
6,9 KG (15,2 Ibs)
ENglIsh
23