ABC Design Amigo Instrucciones De Uso página 13

6. Unfastening the harness
To open the harness, press the button on the leg harness catch.
7. Positioning the sun canopy
First release the catch on the rear of the hood.
Open the hood out over the pushchair.
8. Adjusting the backrest
Pull up the plastic catch located on the rear of the backrest and move the backrest to the required position.
Let the catch go again to allow the backrest to click into the selected position.
9. Adjusting the leg rest
Press the buttons on both sides of the leg rest.
Move the leg rest to the required position and let go of the buttons again to allow the leg rest to click into
the new position.
10. Lock and unlock setting on swivelling wheels
Press the catch down for swivel mode and up for locked mode.
11. Fitting and removing the guard rail
To remove the guard rail, press the catch underneath the rail and pull it out of its fitting.
To fit the guard rail, push it into the fitting until it clicks into place.
NB: The guard rail must be securely engaged otherwise there is a serious risk that your baby can fall out!
12. Folding the pushchair
Before you can collapse the pushchair you have to fold the hood back.
To do this, push up the hood tensioning levers (1) on both sides and push the hood back (2).
Release the cross bracing by pushing the catch up (1).
Then push the lever (2) down.
You can now fold the pushchair.
Apply the transportation lock.
Caution: Ensure that all the catches are engaged before use.
EN - 06