Turning The Lcd On And Off; Camera Ready Led Status - CONCORD Eye-Q Go 2000 Manual Del Usuario

2.0 megapixels
Ocultar thumbs Ver también para Eye-Q Go 2000:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Turning the LCD On and Off

By default, the LCD automatically turns on
when the camera is powered on. Press
turn the LCD on or off.
Using the
Display ON/OFF Button:
1. Press once to turn the LCD icons off.
2. Press
again to turn the LCD off.
3. Press
to turn the LCD on.

Camera Ready LED Status

When the Camera Ready LED is:
1. Steady
The camera is in capture mode. Please hold the
camera steady during this time; otherwise, the image
may come out blurry. (fig.1.5)
2. Blinking
The flash is recharging or the camera is in storage mode. You may move
the camera in this mode. (fig.1.5)
Note: Do not open the battery door or turn the power off while the
Camera Ready LED is steady or blinking; otherwise, the images or
video clips in the camera may be damaged.
A
16
A
to
AWB
fig.1.5
1600
005/080

Publicidad

Tabla de contenido
loading

Tabla de contenido