Bushnell NatureView HD Essential Manual De Instrucciones página 10

Idiomas disponibles

camera's power is switched OFF before inserting or removing SD

cards or batteries.

USING THE NatureView HD Essential

Once you've prepared your NatureView HD Essential by properly installing

batteries and an SD card, you could simply take it outside, strap it to a tree,

switch it on and leave-and you might get some great photos that are exactly

what you wanted. However, we highly recommend that you first spend some

additional time indoors with this manual and your camera until you know a

bit more about what the 3-way switch and those control keys do. If nothing

else, you'll probably want to at least set the date and time so the camera will

imprint them (or not-it's your option) on your photos as they are taken, learn

how to set the camera to shoot video clips instead of still photos if you like,

and read some tips about mounting it on a tree.

THE OFF, ON, AND SETUP MODES

The NatureView HD Essential has three basic operational modes:

• OFF mode: Power switch in the OFF position.

• ON mode: Power switch in the ON position (LCD screen is off.)

• SETUP mode: Power switch at SETUP position (LCD screen is on).

OFF MODE

The OFF mode is the "safe" mode when any actions must be taken, e.g.,

replacing the SD card or batteries, or transporting the device. You will also

use OFF mode if you connect the camera to a computer's USB port later

to download your photos/videos. And of course, when you are storing or

not using the camera, you will switch it to OFF. Please note that even in the

OFF mode the NatureView HD Essential still consumes power at a very

low level. Therefore, it's a good idea to take the batteries out of the battery

compartment if the camera will not be used for a long time.

ON MODE

Anytime after the batteries and SD card have been inserted, you can switch

on the camera. When the power switch is moved to the top position, the

camera will enter into the ON (Live) mode. The motion indicator LED (pg. 7,

"Front View") will blink red for about 10 seconds. This interval allows time for

119739