• Press the OK key to replay (review or playback) photos/videos on a
connected TV monitor. See "Playing Back Photos/Videos" for more
details.
USING THE SETUP MENU TO CHANGE
SETTINGS
The main purpose of the SETUP mode is to allow you to change the
settings of the camera's parameters (14 different ones are available) so your
NatureView HD Essential operates exactly the way you want it to. You will
do this by entering the SETUP Menu and pressing the keys below the LCD
display, which will show you each parameter and its setting.
Changing Parameter Settings in SETUP Mode
A wide range of options or "parameters" are provided to allow you to set
the NatureView HD Essential to your operational preferences. To change
the setting of any parameter you must first switch to the SETUP mode.
Once in SETUP mode, pressing the MENU button will allow you to select
any parameter and change its setting. The name of the parameter and its
current setting will be shown on the LCD. Pressing the RIGHT or LEFT
key scrolls to the next or previous parameter (RIGHT key to move on to the
next parameter and LEFT key to go back to the previous parameter), and
pressing the UP or DOWN key lets you select a different setting for the
currently displayed parameter. Once you have selected your preferred new
setting for a parameter, press the OK button to save the new setting (actually
change it). When have are finished changing the settings of one or more
parameters, press MENU again to exit the SETUP menu. MENU can also
be pressed anytime you want to cancel changing a parameter's setting after
a new setting has been selected (but OK has not been pressed yet). After
setting the parameters to your preferences, be sure to move the switch to
ON to begin actually taking photos or videos. No images will be captured if
the switch is left in the SETUP position (unless you press the RIGHT/Shot key
after exiting the menu)-in fact, the camera will power off automatically after a
few seconds with no key pressed.
13