Battery Level Indicator - Refco REF-METER-OCTA 4679462 Manual De Instrucciones

English
Perform the following steps to turn the Tank Capacity Mode Off:
Turning Tank Capacity Mode Off
1. While holding
show on the display. This indicates that the Tank Capacity Mode is currently on.
2. Turn the Tank Capacity Mode off by pressing
Alternate Numeric Display will turn off.
3. Press to return to normal operation.
The Tank Capacity Mode can be turned back on without retraining. The REF-METER-
OCTA will remember the previous 0% and 100% set points until the unit is re-trained as
above. To turn the Tank Capacity Mode on without re-training, perform the following steps:
Turning the Tank Capacity Mode On without Re-training
1. While holding
show on the display. This indicates that the Tank Capacity Mode is currently off.
2. Turn the Tank Capacity Mode on by pressing
Alternate Numeric Display and Percent Indicator will turn on.
3. Press to return to normal operation.

Battery Level Indicator

The battery level indicator shows the relative strength of the batteries. Full power is
indicated by four bars. As the batteries are depleted, the number of bars displayed
decreases, until no bars are left. At this point, it is necessary to replace the batteries (refer
to the Battery Installation section above). If the battery power drops to the point where the
REF-METER-OCTA can no longer function accurately, the power will turn off automatically.
When the batteries are replaced, and the scale is turned back on, the REF-METER-OCTA
will resume operation with all previous setting intact.
down, press . The SET TANK indicator will turn on, and ON will
down, press . The SET TANK indicator will turn on, and OFF will
REF-METER-OCTA User's Guide
. The display will show OFF, and the
. The display will show ON, and the
11