For your safety, turn on/off switch to the OFF position and unplug the saw from the power source before
performing any of the trouble shooting steps below.
1.
Motor is too hot:
Turn off motor and let it cool down to room temperature
Check and clean ventilation openings
If the above actions do not fix the problem, call the Service Center at 1-800-850-2044.
2.
Motor does not run:
Verify that all electrical connections are secure
Test and reset the safety breaker on the power cord ground fault.
Check that the power source is 120v AC
If the above actions do not fix the problem, call the Service Center at 1-800-850-2044
3.
Pump does not pump water to table:
The water in the tray is not deep enough
The water hose is loose or has come off at the pump
The pump electrical cord is not firmly inserted into the intended receptacle
The filter foam in the pump housing is dirty and/or blocked
4.
Movement of the sliding tray is not smooth
The rails are dirty and have build-up from use. Clean rails and guide rollers. Then lubricate them with spray
on water resistant lubricant.
To register your tool for warranty service visit our website at
If within one (1) year from date of purchase, this product fails due to a defect in materials or Workmanship, call the Service
Center at 1-800-850-2044. Please have a copy of the original receipt for all warranty claims. This warranty excludes incidental
or consequential damages and failures due to misuse, abuse or normal wear and tear. This warranty gives you specific rights,
and you may also have other rights, which vary, from state to state. Please call 1-800-850-2044 for details.
REPLACEMENT PARTS
U s e o n l y i d e n t i c a l re p l a c e m e n t p a r t s . You can order parts by calling Technical Service Manager at
1-800-850-2044 to receive personalized support from one of our highly-trained representatives.
free warning label replacement
If your warning labels become illegible or are missing, call 1-800-850-2044 for a free replacement.
TROUBLESHOOTING
One Year Limited New Product Warranty
www.Lackmond.com
18
18
.