Layout And Items Supplied; Proper Use - EINHELL TE-MX 1600-2 CE Manual De Instrucciones

Additional safety instructions
a) The equipment must not be used in environ-
ments with potentially explosive atmospheres.
Do not mix any solvents or solvent-based
materials with a fl ash point below 21°C.
b) Do not run any cables over any parts of your
body.
c) Only use an extension cable which is appro-
ved for the type of work.
d) You are required by law to wear close-fi tting
clothing.
e) The equipment should be operated via a re-
sidual current protective device (PRCD) with
a rated trip current of no more than 10 mA in
order to avoid danger.
f) Keep water away from all parts of the electric
tool and from persons in the work area.
g) Only start up and run down the equipment
when it is in the mixing tub. Ensure that the
mixing tub is stood in a secure and stable po-
sition.
h) Do not reach into the mixing tub with your
hands or any objects while mixing is in pro-
gress.
i) When working with the mixer, we recommend
that you wear work gloves, goggles and ear
protectors.
j) Take the reaction torque into account. During
operation always hold the equipment fi rmly in
both hands.
Keep this safety information in a safe place.

2. Layout and items supplied

2.1 Layout (Fig. 1)
1. On/Off switch
2. Speed controller
3. Locking button
4. Mixing tool mount
5. Gear selector switch
6. Mixing tool
7. Open-ended wrench
2.2 Items supplied
Please check that the article is complete as
specifi ed in the scope of delivery. If parts are
missing, please contact our service center or the
sales outlet where you made bought the product
within the maximum days indicated by the con-
sumer protection laws of your country and upon
presentation of a valid bill of purchase. Also, refer
to the warranty table in the service information at
Anl_SA_TE_MX_1600_2_CE_SPK8.indb 16 Anl_SA_TE_MX_1600_2_CE_SPK8.indb 16
GB
the end of the operating instructions.
•
Open the packaging and take out the equip-
ment with care.
•
Remove the packaging material and any
packaging and/or transportation braces (if
available).
•
Check to see if all items are supplied.
•
Inspect the equipment and accessories for
transport damage.
•
If possible, please keep the packaging until
the end of the guarantee period.
Danger!
The equipment and packaging material are
not toys. Do not let children play with plastic
bags, foils or small parts. There is a danger of
swallowing or suff ocating!
•
Paint and mortar mixer
•
Mixing tool
•
Open-ended spanner (2x)
•
Original operating instructions

3. Proper use

The machine has been designed to mix liquid
and powderery building materials such as paint,
mortar, adhesive, plaster and similar substances.
The relevant mixing action (which depends on the
consistancy of the materials and the quantity that
has to be mixed) must be set up for the appropri-
ate mixing tool.
The equipment is to be used only for its prescri-
bed purpose. Any other use is deemed to be a
case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.
- 16 -
23.11.2016 07:41:34 23.11.2016 07:41:34