Programming A Dish - newcook SILVER Manual De Instrucciones

You can program the robot to automatically cook without being present, so just into the
ingredients, the desired time to eat and let the robot cook for you.
1. Chosee the recipe: Select the Menu, temperature and cooking time.
2. RSV: Once you have selected the menu, the cooking time and power, you may then programme
cooking by pressing the "RSV" button.
3. Eating time: By pressing the Hour + button we adjust the hours and the Min – button we
adjust the minutes. We should programme how many hours and minutes are remaining before
mealtime. Therefore, if it is 08:00 am and we want to eat lunch at 14:00, we should programme
6:00 h.
4. By pressing the oN button we set the eating time and the remaining time until the food is
ready to eat will be shown on the screen. By pressing the Temp button, the selected power and
cooking times will be shown on the display screen.
5. Please remember that in this mode you select the time you want to eat, and not the time to
start cooking. Newcook Multi-purpose Cooker will automatically calculate when it has to start
cooking so that the meal is ready at the time you want to eat. If you are late home for the meal,
remember that Newcook Multi-purpose Cooker will keep it warm for you until you cancel the
menu.
Always program the robot, at least 2 hours in advance.

Programming a dish

23