Sleep Timer; Factory Reset - Roadstar TRA-130D+ Manual De Instrucciones

3 English
INFO
When the radio station is playing, press the [Info/Sleep] button (3) repeatedly to cycle
through the information broadcasted by the radio as follow:
UNDER DAB
DLS (Dynamic Label Segmenting): Radio text broadcasted from the DAB station

such as the news, songs being played...etc.
PTY (Programme Type): shows which type of programme you are listening to,

"Music", "Talk", "News" etc. If there is no information, it will display "Programme
Type".
Channel/Frequency: The frequency of DAB is displayed such as "11C

220.352MHz".
Audio info: The display shows the digital audio bit rate of the current reception.

Signal error: The signal strength is displayed graphically.

Time/Date: The time and date are set automatically.

Software version

UNDER FM
RT (Radio text): Text broadcasted from the FM station

Signal error: The signal strength is displayed graphically.

Time/Date: The time and date are set automatically.

Frequency: the FM frequency for the radio station in playing.

Auto / Stereo: Automatic switching between mono and stereo reception.

Note: The time and date accuracy depends on the info broadcasted from the ra-
dio station.

SLEEP TIMER

The sleep timer switches the radio off automatically after an adjustable time.
1. Long pressing the [Info/Sleep] button (3) will enter the Sleep timer setting with
options 15/30/45/60/90/OFF;
2. Press the [CH -/+] button (8/9) to choose the timer;
3. Press [Enter] button (5) to confirm.
The timer will display on the top right corner of the display. If 15 minutes is set, it will
display S15 and the radio will switch off automatically after 15 minutes.
CANCEL SLEEP TIMER
Long pressing the [Info/Sleep] button (3) will enter the Sleep timer setting;
1.
Press the [CH -/+] button (8/9) to choose OFF;
2.
Press [Enter] button (5) to confirm.
3.

FACTORY RESET

1. Power off the radio;
2. Hold the [Power/Mode] (2) and [Scan/Preset] (4) together until the display is lit
and show "RESET System";
3. Release both buttons. The radio will reboot and scan DAB stations.