Steren AMP-012 Manual De Instrucciones página 14

CONTROLS
PORTABLE AMPLIFIER CONTROLS
1.- MP3 VOL: MP3 volume control (SD card reader). Move to MAX
to increase the volume level, move to MIN to decrease it.
2.- MIC: Auxiliary input or input for wire microphone.
3.- MIC VOL: Wired microphone volume control. MAX increases
the volume and MIN lowers the volume.
4.- Bat low LED: This LED turns on when the battery is discharged.
5.- Power: Turn on LED indicator.
6.- Wireless VOL: Wireless microphone volume control. Move to
MAX to increase the volume level, move to MIN to decrease it.
7.- RF: RF signal LED indicator.
8.- Antenna.
9.- CHARGE LED: This LED turns on when the back-up battery is
charging. This LED turns off when the battery is charged.
10.- ECHO: Use this control to apply echo effect while using a microphone.
Move to MAX to increase the effect level, move to MIN to decrease it.
11.- TONE: Tone control. High: in this position, the tone increase
and you will hear more treble tones. Low: in this position, the tone
decrease and you will hear more bass tones.
12.- Holder.
13.- Holes to hang the amplifier in a wall.
14.- ON/OFF/Charge Switch: ON: Turn on. OFF: Turn off.
CHARGE: In this position the battery is charging, if the amplifier is
connected to an electrical contact.
15.- SD card slot: Use it to place a SD card with MP3 files.
16.- In-use indicator: Flashes when an MP3 file is played. Fixed when is in pause.
17.- Play: Press to start playing a file.
18.- Forward: Press to jump next song.
19.- Backward: Press to return previous song.
14
TOP VIEW
9
11 10
1 2 3 4 5
FRONT VIEW
REAR VIEW
8
6