1. READ BEFORE OPERATING
DISPLAY
Function indicators on indoor unit display panel
Infrared signal receiver
Receive the signal from remote
controller
Timer lamp
Illuminate during TIMER operation
Operation lamp
Illuminate during operation
NOTE
All the pictures in this manual are for explanation purpose only. They may be slightly different from the air
conditioner you purchased (Model dependent).The actual shape shall prevail.
A guide on using the remote controller (or wired controller) is included in this literature packaged.
2. OPEATION
2.1 OPEATING CONDITIONS
Opeating Conditions
Cooling Operation
Heating Operation
Note: DB - Dry Bulb
Optimum performance will be achieved within these operating temperatures.
When the unit operates above or below these conditions for a long time, system
diagnostics may detect a malfunction and the unit will not operate properly.
Room relative humidity - less than 80%. If the air conditioner operates outside this range,
the surface of the air conditioner may attract condensation.
2.2 HINTS FOR ECONOMICAL OPERATION
Adjust the temperature to achieve moderate comfort levels. Excessively low or high temperatures
waste energy.
Improve performance by keeping windows and doors closed.
Limit energy usage [run time] by using the TIMER function.
Do not block air inlets or outlets. Poor performance, increased running costs and reduced product
life will result.
Inspect the air filters periodically, and clean them when needed.
Disconnect the power source if unit will not be used for a long period.
Indoor
Upper limit
32°C DB
Lower limit
18°C DB
27°C DB
Upper limit
Lower limit
0°C DB
DEF./FAN lamp
Illuminate during DEFROST
operation
Manual button
This switch is used for after-sales
service purpose only,the user
should not push it.
Outdoor
46°C DB
-10°C DB
24°C DB
-15°C DB
GB-4
7