Pleasant Hearth WS-2720 Manual De Instrucciones página 3

WARNING
This product and the fuels used to operate this product
(charcoal or wood), and the products of combustion of such
fuels, can expose you to chemicals including carbon black,
which is known to the State of California to cause cancer,
and carbon monoxide, which is known to the State of
California to cause birth defects or other reproductive harm.
For more information go to www.p65Warnings.ca.gov
Leg Installation (If required)
Before Installing Stove, Follow These Steps for
leg Installation.
Model: WS-2720 and WS-2720-B
Medium Wood Stove w/Legs
Remove Ash pan and (4) bolts that secure the stove body
to the pedestal as shown in Figure 0.
With assistance, lift stove off of pallet and lay stove on its
side on a safe, elevated, padded and level platform that
is about 6" off the ground.
Using the bolts that were removed in step 1, bolt each
leg to the bottom of the stove as shown in Figure 0.1.
With assistance, lift the stove off of the raised platform,
set upright on the legs, and re-install the ash pan.
When stove is in place for installation, make sure stove is
level by adjusting the leg levelers shown in Figure 0.2.
Figure 0
ash pan
Figure 0.1
Figure 0.2
2
leg leveler