BOB BLAZE Guia Del Usuario página 14

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

BOB Gear
8� Reorient the Front Wheel
Open the front wheel and front
brake quick releases. Remove
the front wheel and flip it around
so the quick release lever is on
the opposite side. Reinstall the
front wheel, secure the wheel and
brake quick release levers. See
Removing Front Wheel and Front
Wheel Installation sections.
Wheel Reoriented With Quick
Release Lever On Opposite Side
9� Perform Roll Test
If the stroller still consistently pulls
to the left or right when pushed
straight, proceed to Fine Tune
Tracking section.
Fine Tuning the Tracking
Use the tracking knobs on either side
of the front wheel to fine tune the
tracking.
Tracking Knobs
If Stroller Pulls LEFT
1� Open Quick Release Lever
Open quick release lever on
front wheel. It is not necessary
to remove the front wheel. See
Removing Front Wheel section.
2� Adjust LEFT Knob
Turn the left knob clockwise one
full turn thereby pushing the
left side of the wheel forward.
Retighten quick release. See
Front Wheel Installation.
12
3� Repeat Roll Test
If stroller still pulls to the left,
repeat steps 1 and 2.
If Stroller Pulls RIGHT
1� Open Quick Release Lever
Open quick release lever on
front wheel. It is not necessary
to remove the front wheel. See
Removing Front Wheel section.
2� Adjust RIGHT Tracking Knob
Turn the RIGHT tracking knob
clockwise one full turn thereby
pushing the right side of the
wheel forward and retighten
quick release. See Front Wheel
Installation section.
3� Perform Roll Test
Repeat Roll test. If stroller still
pulls to the right, repeat steps 1
and 2.

Publicidad

Tabla de contenido
loading

Tabla de contenido