Creating A Personal Database - Waeco ASC 2500 G LE Instrucciones De Uso

Operation
I
NOTE
The user is created and the menu changes back to the user selection.
You can now create another user or exit the menu by pressing STOP.
8.3.2 Entering user codes
When you switch on the air conditioning service station, the device data
appears in the display. If a user code has been created, the same code
must be used to enable the station.
1. Enter the correct user code.
If you enter an incorrect user code, the following error message
appears:
Once the correct code is entered, the station is enabled and it starts
up. The user's name is displayed:
8.4

Creating a personal database

You can enter up to 100 customer-specific vehicles with the correspond-
ing filling quantities in this database.
1. In the basic menu, use the cursor keys  or  to select "Short
selection":
2. Press ENTER to confirm.
3. Once you have entered the vehicle license plate number (this can
also be left blank), press ENTER to confirm.
98
ENTER USER CODE
WRONG CODE
John Citizen
Short selection
Free selection
Other selections
ENTER-OK
CAR DATA
PLATE NR:
ASC 2500 G LE / ASC 3500 G LE
----
EN