Accu-Chek Performa Instrucciones De Uso página 17

Here is how to mark a test result and initiate a post-meal test reminder:
1. Perform a blood glucose test. The blood glucose result appears on the display.
2. Leave the test strip in the meter. Press and release
post-meal test reminder.
3. When the marker or test reminder that you wish to select appears on the display, remove the test strip
from the meter.
Unusual Blood Glucose Results
If your blood glucose result does not match how you feel, check this list to help solve the problem.
Troubleshooting Checks
1. Did you wash your hands?
2. Were the test strips expired?
3. Was the cap on the test strip container
closed tightly?
4. Was the test strip used immediately after
it was removed from the test strip
container?
5. Were the test strips stored in a cool, dry
place?
6. Did you follow the directions?
7. Are the meter and test strips working
properly?
Document Name: ART-07022590007
8. Are you still unsure of the problem?
Document Number: 0000109119
Version: 1.0
This copy will not be updated. Verify the validity of this version in the appropriate electronic repository.
78120_07022590007_EN.indb 15
Blood Glucose Tests
or to toggle through the test result markers and
Action
Wash your hands with warm soapy water and dry
thoroughly. Repeat the blood glucose test with a new
test strip.
Discard the test strips if they are past the use by date.
Repeat the blood glucose test with an unexpired test
strip.
Replace the test strips if you think the test strip
container was uncapped for some time. Repeat the
blood glucose test.
Repeat the blood glucose test with a new test strip.
Repeat the blood glucose test with a properly stored
test strip.
See Chapter 2, Blood Glucose Tests, and repeat the
blood glucose test. Contact Roche if you still have
problems.
Perform a control test. See Chapter 4, Performing a
Control Test, for instructions.
Lifecycle Status: Effective
Contact Roche.
2
15
4/23/2019 1:56:37 PM
Confidential
Valid from: 02-Aug-2019
Page 17 of (180) page(s)