Frequency Search Function; Receiving A Multicast Station (Hd Radio Mode Only) - Alpine CDA-9885 Manual De Operación

Frequency Search Function

You can search for a radio station by its frequency.
1
Press and hold /ESC for at least 2 seconds in
Radio mode to activate Frequency search mode.
2
Turn the Rotary encoder to select the desired
frequency.
3
*
Press / /ENT to receive the selected frequency.
* Operation is not required during HD Radio reception.
• Press and hold /ESC for at least 2 seconds in the search mode to
cancel. Or, the search mode will be canceled if no operation is
performed for 10 seconds.
Receiving a Multicast Station
(HD Radio mode only)
Multicasting is the Ability to broadcast multiple program streams over a
single FM frequency. This increases the amount and diversity of content
choices. A maximum of eight multicast station channels can be selected
on this unit.
When multicast station is received, the program number
and the SPS indicator lights up. Press
the desired program service.
Receiving the Multicast Station Program Service.
Program No.
Program Service example:
Multicast Radio Station Program No.
90.3 MHz No.1
90.3 MHz No.2
90.3 MHz No.3
90.3 MHz No.8
or to select
SPS Indicator
Program Service
MPS: Main Program Service
SPS: Sub-program Service
SPS: Sub-program Service
|
|
|
|
SPS: Sub-program Service
9
-EN