Repeat Play; Displaying The Text - Alpine CDA-9885 Manual De Operación

Repeat Play

Only Repeat One is available for the iPod.
Repeat One: A single song is repeatedly played back.
1
Press 4.
The song is played back repeatedly.
RPT (off) RPT
(Repeat One)
2
To cancel repeat play, select (off) with the above
procedure.
• During repeat playback, no other songs are selectable by pressing
or .

Displaying the Text

You can display the tag information of a song in the iPod.
Press TITLE.
Each press changes the display.
• If you want to change the display when the text scroll is set to
Manual, press TITLE while the text is scrolling. If the scroll has been
completed, press TITLE to scroll the text again.
1
Song Name *
2
Track No./All Songs No. /Elapsed Time
*
1
Song Name *
(Blank)
(Blank)
Calendar/Clock
1
* TAG information
If the Scroll Setting (page 20) is set to "Auto," the tag information
will scroll automatically.
If there is no text information, nothing will be displayed.
2
* The numbers of all songs displayed vary depending on the songs
selected by the search.
3
* When the Scroll Setting (page 20) is set to "Auto," the display cannot
be switched by pressing TITLE. The display contents switch
alternately.
• Only alphanumeric characters (ASCII) can be displayed.
• If the artist, album or song name, created in iTunes, has too many
characters, songs may not be played back when connected to the
adapter. Therefore, a maximum of 250 characters is recommended.
The maximum number of characters for the head unit is 128
(128 byte).
• Some characters may not be correctly displayed.
• The display is blank when text information is not compatible with this
unit.
3
*
1 1
Artist Name * Album Name *
1 1
Song Name * * Song Name *
1
Song Name *
2
Track No./All Songs No. /Elapsed Time *
3
*
27
-EN