Symptoms
Door is not closed properly.
Water overfills due to the faulty
water valve.
Water level sensor has
malfunctioned.
Over load in motor.
Water leaks.
The washer experienced a power
failure.
Control Error
Is Inlet/outlet hose or drainage
pump frozen?
Reason
• Close the door completely.
• Unplug the power plug and call for
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Allow the washing machine to stand for
• Call for service.
• Restart the cycle.
• Unplug the power plug and call for
• Supply warm water into the tub and
Solution
If '
,
,
' is not released, call for
service.
service.
30 minutes to allow the motor to cool,
then restart the cycle.
service.
unfreeze outlet hose and drainage pump.
Wet a towel in warm water and apply to
inlet hose.
45