LG WM22RV2S6 El Manual Del Propietario página 44

Symptoms
44
Reason
Door is not closed properly.
Water overfills due to the faulty
water valve.
Water level sensor has
malfunctioned.
Over load in motor.
Water leaks.
The washer experienced a power
failure.
Control Error
Is Inlet/outlet hose or drainage
pump frozen?
If the washing machine detects
too many suds, it displays this
error code and adds a Suds
Reducing cycle. This adds about
2 hours to the cycle time. If too
many suds are detected during
spinning, the washing machine
stops to help prevent leaking.
Solution
• Close the door completely.
If ' , , ' is not released, call for
service.
• Unplug the power plug and call for
service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Close the water tap.
• Unplug the power plug.
• Call for service.
• Allow the washing machine to stand for
30 minutes to allow the motor to cool,
then restart the cycle.
• Call for service.
• Restart the cycle.
• Unplug the power plug and call for
service.
• Supply warm water into the tub and
unfreeze outlet hose and drainage pump.
Wet a towel in warm water and apply to
inlet hose.
• Do not add more than the manufacturer's
recommended amount of detergent.
• To remove suds, turn the washer off and
on, then run the Rinse+Spin cycle
(Enjuague+Centrifugado).