Eshift With The Kiox On-Board Computer - Bosch eShift Shimano Nexus Di2 Instrucciones De Servicio

English – ​ 3

eShift with the Kiox on-board computer

The gear and switching mode (manual M/automatic A) are
always displayed on the start page. If you are on another
screen, the gear will be briefly shown on the display each
time it is changed.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set starting gear. The starting gear can be set under
<Settings> → <My eBike> → <eShift> → <Start gear>.
You can carry out fine adjustment of the Shimano Di2 under
<Adjust gear>. The pre-defined setting range can be found
in the operating instructions provided by the gearing manu-
facturer. Perform fine adjustment as soon as you hear the
gearing make unusual noises.
Bosch eBike Systems 0 275 007 XES | (06.02.2019)