Eshift With Rohloff E-14 Speedhub - Bosch eShift Shimano Nexus Di2 Instrucciones De Servicio

eShift with Rohloff E-14 Speedhub

500/14
eShift with the Intuvia on-board computer
The engaged gear will be shown briefly on the display
whenever the gear is shifted.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set in the basic
settings menu.
Intuvia eShift basic settings menu
You can choose from the following additional basic settings:
...
<– Start gear +>: The starting gear can be set here. The
automatic shift-back function is switched off in the – – posi-
eShift with the Nyon on-board computer
The gear is always displayed in the eShift field. The gear is
displayed briefly during a gear shift only when the eShift
field is not visible (e.g. in settings).
eShift with the Kiox on-board computer
The gear is always displayed in the start page. If you are on
another screen, the gear will be briefly shown on the display
each time it is changed.
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set starting gear. The starting gear can be set under
<Settings> → <My eBike> → <eShift> → <Start gear>.
Bosch eBike Systems
Always use the Speedhub gearstick to shift gears with the
Rohloff Speedhub 500/14.
Keeping the gearstick pushed down causes the system to
keep shifting gear in increments of three after the first gear
change, until the lowest or highest gear is reached.
tion. This menu item is displayed only when the on-board
computer is in the holder.
...
<Gear vx.x.x.x>: Variable speed transmission software ver-
sion. This menu item is displayed only when the on-board
computer is in the holder. This menu item only appears in
conjunction with an electronic variable speed transmission.
...
Intuvia eShift function displays
You can choose from the following additional functions in
the function display (combination of text display and value
display):
...
<Gear>: The currently engaged gear is shown on the dis-
play. The newly engaged gear is briefly shown on the display
each time the gear is changed.
...
The drive unit detects the gear shift and briefly reduces the
motor assistance level as a result, which means the gear can
also be shifted at any time under load or on a hill.
If the eBike is brought to a stop from a speed of more than
10 km/h, the system may automatically shift down a gear to
a set <Start gear>. The <Start gear> can be set under <My
eBike> → <eShift>.
English – ​ 9
0 275 007 XES | (06.02.2019)