OHAUS Navigator Serie Manual De Instrucciones página 5

TM
Navigator
2. INSTALLATION
2.1 Transportation Lock
The Transportation Lock is located under the balance. Rotate the pointer to the unlocked position.
2.2 Location
Use the balance on a firm, steady surface. Avoid locations with excessive air current, vibrations, heat
sources, or rapid temperature changes.
Adjust the leveling feet so the bubble is centered in the circle.
2.3 Power
The AC Adapter is used to power the balance when battery power is not needed.
Input Jack
Battery
Cover
Connect the AC Adapter plug to the
input jack.
Battery installation (without optional internal battery):
Remove battery cover and install 4 batteries using the polarity indications as shown in the
compartment.
Connect AC Adapter to the
proper AC supply.
EN-3