Front Runner FAJL002 Manual Del Usuario página 6

FIT AND SECURE INNER BRACKETS AND FOOT RAIL
2
2.7
2.8
2.9
8
9
10
11
FAJL002 / FAJL003_REV_A01
4
12
13
1LH
14
15
8
Refit both the Middle Support Brackets.
Refer to Step 2.3 and 2.4.
13mm
Place the Foot Rail (Item 1) onto the
spacer and secure using M6 x 40 Hex
Bolts, M6 x 30 x 2 Flat Washers, PVC
Washers, M6 x 12 x 1SS Flat Washer and
M6 Nyloc Nuts (Items 9, 10, 11, 14 & 15)
as shown. Do this on both sides of the
vehicle.
10mm
Finish off by placing M6 Nut Caps
12
(Item 8) on all the nyloc nuts and bolt
heads.
13
6
Insert the Aluminum Spacers (Item 13)
into the Foam Washer (Item 12). Remove
the paper backing from the Foam
Washer to expose the adhesive.
Insert the Washer/Spacer combination,
adhesive side down, into the 22mm
holes so that the Spacer comes to rest
on the Inner and Middle Support
Brackets.
Firmly press the Foam Washer all the
way around, securing it to the roof.
13mm 13mm
© 2019 FRONT RUNNER VEHICLE OUTFITTERS