Blackstone 1832 El Manual Del Propietario página 7

Model 1832 | Owner's Manual | Assembly Guide
!
WA R N I N G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you ASSEMBLY INSTRUCTIONS
should handle all compo-
Please read all instructions thoroughly before proceeding. Make sure all
nents with care to avoid
the plastic packing material is removed before assembling
accidental injury.
Find a large, clean area to assemble your griddle. Please refer to the parts list
Some parts may contain
and assembly diagrams as necessary.
sharp edges, especially
as noted in these instruc-
tions. Wear protective
gloves if necessary.
!
WA R N I N G
The use of alcohol, prescrip-
S T E P 0 1
tion or non-prescription
drugs may impair the
top off and set aside.
consumer's ability to prop-
erly assemble or safely
S T E P 0 2
operate the appliance.
flange nuts to attach four (4) griddle legs to the bottom of the griddle.
!
C A U T I O N
Two people are recom-
mended for the assembly
of this product.
08
Remove the griddle body from the packaging. Take the griddle
Place the griddle upside down on a soft surface. Use four (4) M8
S T E P 0 3
Ensure that the fuel nozzle is housed within the burner opening.
S T E P 0 4
Turn the griddle over so it stands on its legs. Check the ignition
needle. The needle needs to be placed 3-7mm above the burner tube.
Assembly Guide | Owner's Manual | Model 1832
TOOLS NEEDED: Phillips Head
Screwdriver & Adjustable Wrench
09