Blackstone 1819 Manual De Instrucciones página 7

Model 1819 | Owner's Manual | Assembly Guide
!
WA r n I n G
The manufacturer has made
every effort to eliminate any
sharp edges. However, you ASSEMBLY INSTRUCTIONS
should handle all compo-
Please read all instructions thoroughly before proceeding. Make sure all
nents with care to avoid
the plastic packing material is removed before assembling
accidental injury.
Find a large, clean area to assemble your griddle. Please refer to the parts list
Some parts may contain
and assembly diagrams as necessary.
sharp edges, especially
as noted in these instruc-
Griddle assembly involves large components; therefore, it is advised to
tions. Wear protective
have two people assemble the unit.
gloves if necessary.
!
WA r n I n G
The use of alcohol, prescrip-
S T E P 0 1
tion or non-prescription
drugs may impair the and lay the unit upside down on the flat surface.
consumer's ability to prop-
erly assemble or safely
operate the appliance.
!
C A U T I O n
Two people are recom-
mended for the assembly
of this product.
S T E P 0 2
wheels to the right legs.
08
Remove the Griddle & Charcoal Grill Combo body from the box
Install the two (2)
S T E P 0 3
Using both braces, assemble the right legs together with (4)
M6x12 screws. Use one (1) additional M6 Screw and Nut to add the propane
tank hanger to the top leg support.
Propane tank
hanger hardware
S T E P 0 4
Install the legs to the body with eight (8) M6x12 screws being
sure the threaded holes and propane tank hanger are facing outwards.
Propane
tank hanger
Threaded hole
Assembly Guide | Owner's Manual | Model 1819
M6x12
Screws
TOOLS NEEDED: Phillips Head
Screwdriver & Adjustable Wrench
09