Geyser P6 QRG
About This
Guide
Disclaimer
Safety
Notes
The Geyser P6 Quick Reference Guide (QRG) has basic product
information such as mounting, menu options, and DMX values. Download
the User Manual from
The information and specifications contained in this QRG are subject to
change without notice.
These Safety Notes include important information about installation, use,
and maintenance.
·
This product is not intended for permanent installation.
·
ONLY connect this product to a grounded and protected circuit.
·
Always disconnect from power before cleaning or replacing the fuse.
·
DO NOT look at the light source when the product is on.
·
Make sure the power cord is not crimped or damaged.
·
Never disconnect this product from power by pulling on the cord.
·
When mounting this product overhead, use a safety cable.
·
DO NOT allow flammable materials close to the unit while operating.
·
DO NOT touch this product when it is operating because it may be
hot.
·
Do not touch the output nozzle of this product. It is very hot during
operation and may remain hot for several hours after turning the unit
off.
·
Depending on the amount of fog/haze generated, all fog machines
may set off smoke detectors.
·
The voltage of the outlet to which you are connecting this product
must be within the range stated on the decal or rear panel of the
product.
·
This product is for indoor use only! (IP20) To prevent risk of fire or
shock, do not expose this product to rain or moisture.
·
Always mount this product in a location with adequate ventilation, at
least 20 in (50 cm) from adjacent surfaces.
·
Be sure that no ventilation slots on the unit's housing are blocked.
·
Make sure there is adequate fog liquid in the machine to prevent
pump and heater damage.
·
The maximum ambient temperature is 104 °F (40 °C). Do not operate
this product at higher temperatures.
·
In the event of a serious operating problem, stop using immediately.
·
DO NOT open this product. It contains no user-serviceable parts.
·
Do not use for space heating purposes.
·
Drain the tank before transporting the product.
·
Use only CHAUVET® water-based fog fluid.
·
To eliminate wear and improve its lifespan, during periods of non-use
completely disconnect from power via breaker or by unplugging it.
www.chauvetlighting.com
for more details.
EN