Technical Data - HSM Pure 530 Instrucciones De Servicio

10 Technical data

Cutting type
Cut size (mm)
Security level DIN 66399
Cutting capacity * (sheets), A4
Weight (kg)
Cutting speed
Intake width
Power supply
Power consumption
with max. number of sheets
Operating mode
Ambient conditions in operation:
Temperature
Relative humidity
Height above sea-level (MSL)
Size W x D x H (mm)
Shredded material container volume
Sound pressure level emissions
(Idle running/ load)
* The maximum number of sheets (DIN A4, 70 g/m² or 80 g/m²), fed lengthways, which can be cut in one cycle. The
performance data is determined when the motor is cold and the cutting device is freshly oiled. A weaker mains voltage
or a different mains frequency to the one specifi ed could result in less sheet capacity and increased noise during oper-
ation. The sheet capacity can vary depending on the structure and properties of the paper and on the way it enters.
This document shredder meets the applicable harmonisation legislation of the European Union:
• Low Voltage directive 2006/95/EU
• EMC directive 2004/108/EU
• RoHS directive 2011/65/EU
The EU declaration of conformity can be requested from the manufacturer.
16
Strip cut
5.8
P-2, O-2, T-2,
E-2
80 g/m 25 - 27
2
70 g/m 28 - 30
2
27.2
230 V, 50 Hz
HSM Pure 530
english
3.9 4.5 x 30
P-2, O-2, T-2, P-4, O-3, T-4,
E-2 E-3, F-1
19 - 21 14 - 16
21 - 23 16 - 18
29.5
65 mm/s
300 mm
120 V, 60 Hz
500 W
Continuous operation
-10 °C to +25 °C
max. 90 %, without condensation
max. 2,000 m
497 x 362 x 716
80 litres
< 55 dB (A) / < 60 dB (A)
Cross cut
1.9 x 15
P-5, T-5, E-4,
F-2
9 - 11
11 - 13
29.7
220 V, 60 Hz
05/2015