Toaster TO 80 / TO 81
Remove the crumb tray and
■
empty the crumbs.
■
Replace the crumb tray.
Repairing faults
Safety instructions
cAUtION
Follow the safety instructions below to prevent hazards and property
damage:
►
Only electricians trained by the manufacturer are authorised to repair
electrical appliances. Improper repairs can lead to extreme hazards for
the user and damage the unit.
causes of faults and how
to repair
The following table helps repair
and localise small faults:
Fault
The lift button does
not latch.
The roasted goods
are too light.
The roasted goods
are too dark.
Smoke comes out of
the toaster
important!
If you cannot solve the problem with the above steps,
►
please contact our customer service department.
Possible cause
The plug is not plugged
in.
The browning level is set
too low
The browning level is set
too high
The toasting level is set
too high
© Gebr. Graef GmbH & Co. KG - 03
Repair
Plug in the plug.
Select a higher brown-
ing level
Select a lower brown-
ing level
Press the stop button
to abort the toasting
process
EN
25