Vaillant sensoCOMFORT VRC 720f Manual De Uso página 67

MENU → CONTROL
→ Air quality limit: ppm
→ Ventilation boost
→ Humidity prevention
→ Time programme assistant
→ Green iQ:
→ Sytem off
2.12.2 INFORMATION menu item
MENU → INFORMATION
→ Current temperatures
→ Zone
→ DHW temperature
→ DHW circuit 1
→ Water pressure: bar
→ Current room air humidity
→ Energy data
→ Solar yield
→ Environmental yield
→ Power consumption
→ Fuel consumption
→ Heat recovery
Display of energy consumption and energy yield
In the display and in the app that can also be used, the control displays values for the energy consumption and/or the energy yield.
The control displays an estimation of the values for the installation. Among other things, the values are influenced by the following:
–
The installation/design of the heating installation
–
User behaviour
–
Seasonal environmental conditions
–
Tolerances and components
External components, such as external heating pumps or valves, and other consumers and appliances in the household are still not
taken into consideration.
The deviations between the energy consumption or energy yield that is displayed and the actual energy consumption or energy yield
may be significant.
The specifications for the energy consumption or energy yield are not suitable to be used to create or compare energy billing.
The following can be read: Current month, Last month, Current year, Last year, Total
→ Burner status:
→ Control elements
→ Menu introduction
→ Competent person contact info
→ Serial number
0020288151_00 sensoCOMFORT Operating and installation instructions
The ventilation unit keeps the CO
Heating mode is switched off for 30 minutes and, if available, the ventilation unit runs at the highest
ventilation level.
→ Max. room air humidity: %rel: If the value is exceeded, the dehumidifier switches on. If the value
is not reached, the dehumidifier switches off.
Programming of the desired temperature for Monday–Friday and Saturday–Sunday; the program-
ming applies for the time-controlled Heating Cooling, Domestic hot water, Circulation and Ventil-
ation functions
Overwrites the weekly planner for the Heating, Cooling, Domestic hot water, Circulation and
Ventilation functions
Switching on the most energy-efficient heating mode, if your installation supports this.
Installation is switched off. Frost protection and, if available, ventilation remain activated at the lowest
level.
→ Heating
→ Domestic hot water
→ Cooling
→ Installation
→ Heating
→ Domestic hot water
→ Installation
Explanation of the control elements
Explanation of the menu structure
Product description 2
content in the room air below the set value.
2
65