Disposal And Recycling; Cleaning, Maintenance And Ordering Of Spare Parts - EINHELL 41.332.00 Manual De Instrucciones Original

6. Operation
Unscrew the tank (1), fi ll it with the material you
wish to spray and reseal it. Connect the com-
pressed air supply
Set the air pressure on the compressorʼs pressu-
re reducer.
The infi nitely variable trigger lever (3) allows an
exact dosing of the spray material.
The rotating nozzle (2) allows you to adjust the ra-
tio of material to the volume of air and to infi nitely
adjust the spray angle.
Tip: Before starting work, you should conduct a
small test on newspaper to fi nd the ideal settings
for achieving perfect results..
7. Cleaning, maintenance and
ordering of spare parts
Warning! Disconnect the air tool from the com-
pressed air source before cleaning.
Important! Do not fully immerse the tool in sol-
vent.
7.1 Cleaning
•
Clean the nozzle as well if it becomes
clogged unexpectedly or the spray pattern is
poor.
•
We recommend that you clean the appliance
immediately after you use it.
•
Clean the accessories after use with a suitab-
le cleaning agent (observe the instructions on
the working materials).
7.2 Maintenance
There are no parts inside the equipment which
require additional maintenance.
7.3 Ordering replacement parts:
Please quote the following data when ordering
replacement parts:
•
Type of machine
•
Article number of the machine
•
Identification number of the machine
•
Replacement part number of the part required
For our latest prices and information please go to
www.isc-gmbh.info
Anl_Spruehpistole_Saugbecher_SPK9.indb 13 Anl_Spruehpistole_Saugbecher_SPK9.indb 13
GB

8. Disposal and recycling

The equipment is supplied in packaging to pre-
vent it from being damaged in transit. The raw
materials in this packaging can be reused or
recycled. The equipment and its accessories are
made of various types of material, such as metal
and plastic. Never place defective equipment in
your household refuse. The equipment should
be taken to a suitable collection center for proper
disposal. If you do not know the whereabouts of
such a collection point, you should ask in your
local council offi ces.
9. Storage
Store the equipment and accessories in a dark
and dry place at above freezing temperature. The
ideal storage temperature is between 5 and 30
°C. Store the electric tool in its original packaging.
The reprinting or reproduction by any other me-
ans, in whole or in part, of documentation and
papers accompanying products is permitted only
with the express consent of the iSC GmbH.
Subject to technical changes
- 13 -
29.05.2018 15:28:29 29.05.2018 15:28:29