Adjusting The Backrest - ABC Design Avito Manual Del Usuario

6. Unfastening the harness
To open the harness, press the catches in on both sides.
CAUTION: Always use the crotch strap and the lap restraint together.
7. Attaching the hood
Fit the hood on the seat frame with the two plastic brackets.

8. Adjusting the backrest

To adjust the seat unit, pull the retainer on the rear of the backrest upwards and then adjust
the height of the seat. When you have reached the required position, let go of the retainer to
allow the seat to remain in that position.
9. Adjusting the leg rest
To adjust the leg rest, press in the buttons on both sides and then adjust the height.
Let go of the buttons again so that the leg rest clicks into place.
10. Lock and unlock setting on swivelling wheels
Press the catch down for swivel mode and up for locked mode.
11. Fitting the guard rail
a. Fit the brackets on the pushchair frame.
12. Folding the pushchair
Press the round button (1) on the right-hand release catch in order to unlock the folding
mechanism.
Then pull both release catches (2) up and lower the handle.
Note: To unfold the pushchair, follow the instructions in point 1 "Opening the pushchair".
EN - 06