Defect And Repair; Cleaning - Oase Lunaqua 35 Instrucciones De Uso

Defect and repair

Malfunction
Lamp does not
light
Luminous
power dropping
Water in
spotlight
Light flickers

Cleaning

— Carry out the steps as described for changing the bulb.
— Use only water and a soft brush.
— Ensure that no moisture enters the spotlight.
Repair
— If the cable or the housing is damaged, the transformer cannot be repaired and
8
Lunaqua35 Exp.p65
GB Operating instructions
Possible cause
Power supply
interrupted
Soiled
Seals
defective
Corroded
contacts
must be replaced.
8
M e a s u r e s
1. Check power supply and fuses.
2. Check lamp, change it if
necessary.
3. Clean contacts, spot light and
transformer
Clean
Check seals ans replace, if
necessary
Clean lamp pins, disconnect
cable hamess from spot light,
clean contacts
28.03.2003, 09:23
GB