Trevi XF 1700KB Manual Para El Uso Y La Conexión página 10

ENGLISH
Caution:
- The stand-by function is activated only if the ON/OFF power switch(13) is ON.
- In stand-by function there is no LED indicating.
- We remember leaving the unit in stand-by function the battery discharges faster than using the ON/OFF(13).
MODE SETTING FUNCTION
To change the mode function, press more 'times the MODE key (6) on the unit or press the button (33) on the remote control to
select RADIO (display will show the frequency), BLUETOOTH (the display BLUE), USB (only if the USB socket(10) is connected
to a memory, the display shows for a few seconds "Lod"), SD (only if the SD Card input(9) is connected to a memory, the display
shows "Lod" for a few seconds), AUX (the display shows LINE-IN).
ADJUSTING THE VOLUME
1. Turn the Main Volume control (24) to increase or decrease the overall volume of playback, or use the buttons (31) and (37) on
the remote control.
2. Turn the Microphone 1/2 Volume(18) to adjust the volume level signal inputs MICROPHONE 1/2(16/15). The adjustment acts
on the two inputs simultaneously.
PRE-EQUALIZER
This unit has the pre-equalization audio. Press the SOUND button (35) on the remote control to select a setting that best suits the
sound reproduction in progress. The pre-equalization are active and can be selected only in the USB and SD function.
SETTING TONE TREBLE AND BASS
Turn the knob TREEBLE (21) to adjust the treble.
Turn the knob BASS (20) to adjust the bass.
ECHO EFFECT
Turn the knob ECHO (19) to increase or decrease the echo effect on the inputs MIC1 and MIC2.
Note: the echo only works on microphone inputs.
DISCO-LIGHT EFFECTS
To activate the effects Disco Light press the LED button(22).
To cancel the effect Disco-Light, press the LED button(22).
ON/OFF LED DISCO BALL PROJECTION
To activate the multi-color LED projection, press Disco ball switch(11) to position "I".
To turn off the multi-color LED projection, press Disco ball switch(11) to position "0".
VOICE GUIDE
To activate the voice guide (only in English), press and hold for a few seconds the PLAY button(4), the display will show "ON" for 1 sec.
To turn off the voice guide, press and hold for a few seconds the PLAY button(4), the display will show "OFF" for 1 sec.
RADIO FM FUNCTION
AUTO MEMORY
1. Connect the antenna wire to the socket(12).
2. Turn on the unit and press repeatedly the MODE key(6) on unit, or the MODE(34) on remote control and select RADIO function
(the display will show the frequency).
3. Press the PLAY button(4) on the unit or the key(31) on remote control to activate the auto memory (the radio starts an
automatic search radio stations and saves them automatically). The station's number stored depends on the radio signal in your
area. During the search, press PLAY button(4) on unit or the the key(31) on remote control to stop recording.
4. Use the NEXT(7) and PREV(5), or the keys :(39) and 9(37) on the remote control to listen to the various radio stations saved
in memory.
5. To call the number of a preset station using the number keys(30) on the remote control.
For example, to call up the station number 12, first press 1 and then 2.
DIRECT RECALL OF FREQUENCY
1. Use the keypad (30) on remote control to tune the desired frequency.
For example, to listen to 93.1MHz frequency type 9 3 1.
Note:
- The FM reception depends on the place where you place the unit.
- The proximity of TV sets, fluorescent lamps or other appliances may cause interference in the reception of radio programs,
in this case, move this unit.
10
XF 1700KB