Kränzle K 1050 TS Manual De Instrucciones Original página 41

Putting into operation
Prior to insertion, check plug coupling connection of lance for cleanliness
(sand, dirt ..) and use clear water to clean, if necessary.
Impurities may damage the sealing in the plug coupling.
4. Unwind high pressure hose straight
and without nooses. (When using hose
extensions take care that the max. length
of 20 m is not exceeded!)
5. Push on high pressure hose to trigger
gun with safety catch.
6. Tightly screw together high pressure
hose and trigger gun with safety catch.
7. First pull back the retaining sleeve of
the gun, then insert lance into the
plug coupling connection of the gun.
8. After insertion of the lance, release reta-
ining sleeve and make sure that the lance
is in a secure position.
GB
41