WALL MOUNTING
In order to prevent injuries,the sound base device
must be securely fasten to the wall in accordance
with the below installation instructions.
Caution:
The ground must be firm and capable of han-
7
dling the load.
Use mountings that are appropriate for the
7
weight of the device.
For wooden or hollow wall structures use suit-
7
able plugs and screws. Seek advice from a
specialist dealer.
Warning:
In order to prevent injuries, the device must
7
be securely fastened to the wall in accord-
ance with the installation instructions.
Note:
Installation of the Soundbar DSB 950 for
7
professional use (e.g. in a bistro) must only
be carried out by an electrically qualified
person, in accordance with the applicable
construction regulations as per VDE 0100.
1
Drill the two holes(about 6mm diameter ) in the
wall and keep the distance between drill holes
of the sound bar is 500mm (Diagram 1).
(Diagram 1)
16
ENGLISH
-----------------------------------------------------------------------------------------------------
2
Insert the two plugs supplied into two drilled
holes and then insert two screws supplied into
two holes and tighten (Diagram 2).
3
Take care to leave 4 mm between the screw
heads and wall (Diagram 3).
4
Use the assembled sound bar to hang on the
setscrews on the wall (Diagram 4).
(Diagram 2)
(Diagram 3)
(Diagram 4)