General Overview - Baby auto biro fix Manual De Uso

iMPortant
read the instructions carefully before
installing the child seat in the vehicle.
notice
1. only suitable if the approved vehicle has been fitted with three-point
safety belts that meet ECE standard Nº 16 or equivalent.
2. Under no circumstances should the safety seat be installed in the front
seat of the car opposite the direction of travel if the car is equipped with
an active airbag.
3. Do not use this child safety seat in passenger seats equipped with airbags.
4. This child seat must be used wiTH the harness system for children
weighing between 0 kg and 18 kg.
5. This child seat may be used wiTHoUT the harness system for children
weighing between 15 kg and 25 kg.
6. Please read the instructions carefully, as incorrect installation could
result in serious injury. if any injuries should occur as a result of incorrect
installation, the manufacturer will accept no liability.
7. This child restraint system complies with the rules of Regulation ECE
44/04 and can be installed in most vehicles equipped with 3-point seat
belts aligned to ECE Regulation 16. Anyway, you should always test the
seat in your vehicle and with children on board before buying it, to ensure
that this model meets all your needs. Under no circumstances shall this
seat be fitted only with a 2-point lap belt.
8. Please consult the Compatible Vehicles leaflet attached if the
manufacturer or model of your vehicle is not included in the list,in order
to ensure the child seat's proper installation in the vehicle.
9. Please never use the safety seat without its cover or without the harness
protectors.
10. Fastening a child dressed in outerwear could reduce the efficiency of the
restraint system.
11. Make sure to protect the child safety seat from direct sunlight as it could
heat up and hurt the child.
12. Child seats or harness accessories that are damaged or have been used
incorrectly must be replaced.
13. Do not leave heavy objects inside the car, as these may injure the child in
18
the event of an accident.
14. Make sure that the buckle is correctly fastened so that the child can be
quickly freed in case of emergency.
15.The safety seat's rigid and plastic elements should be positioned and
installed so that they cannot be trapped by a moving seat or a door during
everyday use of the vehicle.
16. Do not disassemble, modify, or add any piece to the child seat or harness,
as this would seriously affect its basic functioning and the safety that the
child seat provides.
17. The safety seat must remain installed in the vehicle with the safety belt,
even if the child is not seated in the child seat. The child must never be
left unattended while seated in the safety seat, not even outside the
vehicle.
18. Keep the safety seat away from corrosive products.
19. Do not use anchor points that are not listed in the instruction manual and
indicated on the seat.
20.The seat should be replaced after undergoing the violent stresses
associated with an accident.
21. The manufacturer guarantees the quality of its products, but not the quality of
second-hand products or products belonging to other companies.
22. instruction illustrations are for informational purposes only. The child
restraint system may contain small differences compared to the
photographs or images in the instruction manual. These variations do not
affect its certification under ECE Regulation R44/04.

1. General oVerVieW

a. Headrest.
b. Harness straps.
c. Shoulder pads.
d. Belt buckle.
e. Harness adjustment button.
f. Harness adjustment strap.
G. Reclining lever.
H. Reductor cushion.
i. Harness straps connector.
J. SiP (Side impact protection).
k. installation slots (group 0+/1).
l. Headrest height regulator.
M. installation slot group 2.
n. isoclick Fix® connectors.
o. Shoulder pad straps connector.
P. Locking ring.
Q. Anchoring Stem.
19