Machine Components - HSM 105.3 Instrucciones De Servicio

HSM 105.3

3 Machine components

1 2 3 4 5
1 Cut material container
2 Feed opening
3 Safety instructions
4 LEDs
Paper shredder is ready for operation.
Cut material container full or open
5 Rocker switch
: On
: Off, Reverse
8
4 Operation
Switching the paper shredder on
• Press rocker switch
Rocker switch locks in place.
Green LED lights.
Paper shredder is ready for opera-
tion (standby).
Feed paper
• Insert the paper to be destroyed.
See „Technical data" for sheet
capacity.
The shredding pro cess is star-
ted by a pho to –cell in the paper
feeding opening.
Paper is pulled into cutting
system and shredded.
When the paper fee ding open-
ing is free again, the cut ting sy-
stem au to ma tical ly swit ches off
af ter app rox. 3 sec. and returns
to standby.
Shredding CDs and credit cards (see
"Proper Use")
CAUTION!
Depending on the type of material,
splinters could be produced when
shredding CDs. For this reason,
wear protective goggles.
Insert CD/credit card in centre of the feed
opening.
Swit ching paper shredder off
• Tap rocker switch
Switch returns to ze ro po si ti on.
.
.
0802