Premier MCO-4992 Manual De Instrucciones página 21

31-Foot switch (x1)
32-Adapter(x1)
33-Bobbin(x4)
34-Double needle(x1)
35-Winding Pin(x1)
36-Threader (x1)
37-#14 Needle x3
38-Seam ripper
39-Buttonhole foot
40-Button Sewing Plate
41-Zipper foot
TECHNICAL SPECIFICATION
Sewing machine:
Rated voltage:
Rated current:
Preparation before operation
Power connection
1. The power jack of the sewing machine locates in the bottom right, show in Fig. Plug the power
adapter into corresponding jack (27.)
2. Plug the power plug of the power adapter (32) to AC socket, shown in the Fig.
Foot switch connection
1.The foot switch jack lies in the bottom right of the sewing machine, shown in the Fig. Plug the foot
switch into corresponding jack (26).
2.Foot switch(31) shall put on the ground for the convenience of stamp and control
Change and installation of sewing needle
Extraction and installation of sewing needle must be implemented with power off and comply with the
following steps:
P-4
6V Rated input: 100-240V~ 50/60Hz 0.5A
1500mA
Adapter:
Rated output: 6V 1.5A, 9W