Premier MCO-4992 Manual De Instrucciones página 27

adjustment wheel (2) to function 9 and 10.
1. Adjust the function adjustment wheel (2) to function 9 and 10, shown in Fig1.
2. Sewing by same steps of straight sewing
Button Hole sewing
It requires button hole presser foot (39) for button hole sewing.
1. Change button hole presser foot (39)
2. Measure diameter of the button.
3. Draw a straight line a little longer than the button diameter on the texture where needs button hole
sewing.
4. Lift presser foot and put the texture with straight line under the presser foot, make the straight line on
texture corresponding to the sewing needle (16) as well as button hole presser foot (39).
5. Rotate hand wheel (24) to lift sewing needle (16) to the highest position and then adjust
adjustment wheel (2) to function 11.
6. Stamp foot switch (31) gently to start sewing.
7. Sewing machine will sew at medium speed. Release foot switch until the end of marking line to stop
sewing.
8. Rotate hand wheel (24) to lift sewing needle (16) to the highest position and then adjust
adjustment wheel (2) to function 12.
P-10
the function
the function