36 | OR B EA
1 1 T E C H N I CAL S P ECIF ICATI ON S
GAIN CARBON
MATERIAL
Frame
Fork
Recommended use
Available sizes
Ebikemotion® remote controller
Ebikemotion® internal battery fixing
Ebikemotion® Range Extender battery fixing
Stem
Fork´s rake
Maximum number of headset spacers
Fork steerer tube
Fork lenght (axle-to-crown)
UPPER 1" 1/2 (WITH ADAPTER 1" 1/8 - 1" 1/8 FOR INTERNAL CABLING)
Headset bearings
Wheel size
Tyre maximum width
Bottom bracket
BB shell width
Fork dropout standard
Front axle measurements
Front axle thread pitch
Front axle thread lenght
Rear dropout standard
Rear axle measurements
Rear axle/nuts thread pitch
Seatpost diameter
Seatpost clamp
Front derailleur
Front derailleur angle
Big ring max size
Small ring max size
Oval ring max size
Triple chainset compatible
T EC HN I CAL M A NUAL
ORBEA OMR CARBON
Fork blades: Orbea OMR carbon
Steerer tube: Orbea OMR carbon
ALL ROAD EBIKE
XS, S, M, L, XL
IWOC ONE
VERTICAL INTO DOWNTUBE
SEAT TUBE
OC COMPONENTS
ICR headset internal cabling
50mm
30mm
TAPERED 1" 1/8-1" 1/2
400mm
LOWER 1" 1/2
700C
700x40C
Tyre maximum external diameter: 702mm
PRESSFIT (BB386EVO)
86.5mm
12x100mm
12x119mm
DOUBLE LEAD "MAVIC SPEED RELEASE" 2P1.0
13mm
Ebikemotion X35. 135x10mm
Ebikemotion X35 motor
M12
1.25mm
27.2mm
Specific Gain Carbon. Integrated. With light.
DOWN PULL.
BRAZE-ON. REMOVABLE MECH HANGER
63º - 66º
53T
46T
50T
NO
B LUE PAP ER GA I N · CARB O N 2 0 2 1
Chainline
Minimum Q-factor
Maximum crank lenght
Rear derailleur hanger
Drivetrain
compatibility
Front brake
Min/max front rotor diameter
Rear brake
Min/max rear rotor diameter
Rear caliper flat mount fixing bolt lenght
(Chainstay height=20mm)
Internal (brakes, gears and x35) through headset, downtube and chainstays
Cabling
Bottle holder
Compatible DI2 and EPS
Mudguards threads on frame/fork
Rack compatible
Childseat compatible
Trailer compatible
Powermeter
compatibility**
Lights
UCI legal
* Not all calipers and rotors in the market are compatible with all frames.
All componets specificated from Orbea have been tested. For aftermarket options, check componentes dimensions and tolerances
befores purchasing.
** For other powermeters, consult the compatibility and dimensions with the manufacturer.
O R B EA | 37
Shimano 2X Road Groupsets: 43.5mm
Shimano AllRoad 2X Groupsets: 46.9mm
Shimano AllRoad 1X Groupsets: 49.7mm
146mm
175
Standard derailleurs. No direct mount
Shimano: 10V ROAD / ALL ROAD
11V ROAD / ALL ROAD
Sram: 10V ROAD
11V ROAD (No XD or XDR)
Only Shimano 10/11S spline cassettes
XD/Microspline cassettes not compatible
DISC. FLAT MOUNT*
160/160mm
DISC. FLAT MOUNT*
160/160mm (with 20mm adaptor)
Shimano = 33mm
Sram = 27mm
Full sleeve
Internal front brake routing through fork blade
2. ALL SIZES
DI2: YES. BATTERY INSIDE SEATPOST
CAMPAGNOLO EPS: NO
NO
NO
NO
NO
QUARK: YES
STAGES: YES
SRM: YES
Front light integrated in cycle computer mount
Rear light integrated in seatpost clamp
NO
EN