Bosch Professional GWS 18V-100 C Manual Original página 23

OBJ_BUCH-2896-002.book Page 24 Friday, October 21, 2016 1:28 PM
24 | English
 Caution! When using the power tool with Bluetooth®,
interference can occur with other devices and equip-
ment, aircraft and medical devices (e.g. pacemakers,
hearing aids). Also, damage to people and animals in
the immediate vicinity cannot be completely excluded.
Do not use the power tool with Bluetooth® near medical
devices, petrol stations, chemical plants, in areas
where there is a danger of explosion and where blast-
ing takes place. Do not use the power tool with Blue-
tooth® in aircraft. Avoid using the product near your
body for extended periods.
The Bluetooth® word mark and logos are registered trade-
marks owned by Bluetooth SIG, Inc. and any use of such
marks by Robert Bosch Power Tools GmbH is under li-
cence.
Product Description and Specifica-
tions
Read all safety warnings and all instruc-
tions. Failure to follow the warnings and in-
structions may result in electric shock, fire
and/or serious injury.
While reading the operating instructions, unfold the graphics
page for the machine and leave it open.
Intended Use
The machine is intended for cutting, roughing and brushing of
metal and stone materials without the use of water.
For cutting with bonded abrasives, a special cutting guard
(accessory) must be used.
When cutting in stone, provide for sufficient dust extraction.
With approved sanding tools, the machine can be used for
sanding with sanding discs.
With the Bluetooth® Low Energy Module GCY 30-4 inserted,
data and settings of the power tool can be transferred be-
tween the power tool and a mobile terminal device by means
of Bluetooth® wireless technology.
GWS 18V-... SC:
The light of this power tool is intended to illuminate the power
tool's direct area of working operation and is not suitable for
household room illumination.
Technical Data
Angle Grinder
Article number
Rated voltage
Rated speed
* depending on the battery pack being used
** limited performance at temperatures <0 °C
A) The mobile terminal devices must be compatible with Bluetooth® Low Energy devices (version 4.1) and support the Generic Access Profile (GAP).
B) The signal range may vary greatly depending on external conditions, including the receiving device used. The Bluetooth® range may be significantly
weaker inside closed rooms and through metallic barriers (e.g. walls, shelving units, cases, etc.).
1 609 92A 2U4 | (21.10.16)
Product Features
The numbering of the product features refers to the illustra-
tion of the machine on the graphics page.
1 Release lever for protection guard
2 Direction-of-rotation arrow on housing
3 Spindle lock button
4 User interface
5 On/Off switch
6 Battery pack*
7 Battery unlocking button*
8 Cover for Bluetooth® Low Energy Module GCY 30-4
9 Auxiliary handle (insulated gripping surface)
10 Grinder spindle
11 Protection guard for grinding
12 Mounting flange with O-ring
13 Grinding wheel*
14 Clamping nut
15 Quick-clamping nut
16 Protection guard for cutting*
17 Cutting disc*
18 Hand guard*
19 Rubber sanding plate*
20 Sanding sheet*
21 Round nut*
22 Cup brush*
23 Button for charge-control indicator (GBA 18V...)*
24 Battery charge-control indicator (GBA 18V...)*
25 Handle (insulated gripping surface)
26 Cutting guide with dust extraction protection guard *
27 Diamond cutting disc*
28 Battery status indicator (User interface)
29 Speed preselection level indicator (User interface)
30 Speed preselection button (User interface)
31 Power tool status indicator (User interface)
32 Overload protection indicator (User interface)
33 Button for charge-control indicator (GBA 18V 6.3Ah)*
34 Battery charge-control indicator (GBA 18V 6.3Ah)*
35 LED work light (GWS 18V-... SC)
36 Diamond core cutter*
*Accessories shown or described are not part of the standard de-
livery scope of the product. A complete overview of accessories
can be found in our accessories program.
GWS 18V-
100 C
3 601 JG3 0..
V= 18
-1
min 9000
*
GWS 18V- GWS 18V-
115 C 125 C
3 601 JG3 1.. 3 601 JG3 1..
18
9000 9000
Bosch Power Tools
18