Training Tip; Troubleshooting - Sigma ROX 9.1 Manual De Instrucciones

9 IMPORTAnT nOTES/TROUBlEShOOTInG/FAQ

9.3 TRAInInG TIP

Consult your doctor before beginning any
exercise program. This is particularly
important if you have underlying cardio-
vascular problems.

9.4 TROUBlEShOOTInG

no speed display
k Is the computer correctly clicked onto
the bracket?
k Have you checked the contacts for
oxidation/corrosion?
k Have you checked the magnet/transmitter
distance (max. 12 mm)?
k Have you checked whether the magnet
is magnetized?
k Have you checked the battery status on
the speed transmitter?
no cadence display
k Have you checked the magnet/transmitter
distance (max. 12 mm)?
k Have you checked whether the magnet
is magnetized?
k Have you checked the battery status on
the transmitter?
no pulse display
k Are the electrodes damp enough?
k Have you checked the battery status?
no display
k Have you checked the battery status on
the SIGMA ROX 9.1?
k Is the battery inserted correctly
(+ facing up)?
k Are the battery contacts ok? They
should be raised approx. 30 degrees.
(If not, bend carefully)?
68
www.sigmasport.com
For people with pace makers, we recommend
checking the compatibility of the SIGMA
ROX 9.1 and your pace maker with your
doctor before using the chest belt.
Wrong speed display
k Are 2 magnets fitted?
k Is the magnet correctly positioned
(parallel to the transmitter and centered
with the transmitter)?
k Is the wheel circumference set correctly?
k Is the transmitter set on the right bicycle
(bicycle I or II)?
Display black/dull
k Is the temperature too high (> 60°C)
or too low (< 0°C)?
no synchronization
k Have you checked the magnet/
transmitter(s) distance?
k Is/are the battery/batteries on
the transmitter(s) empty?
k Have you checked the range on the
respective transmitter?
k When using a hub dynamo, please change
the position of the transmitter.
Display "TOO MAny SIGnAlS"
k Please increase the distance to the other
transmitters and press any button.