Danby DAC150EB2WDB Manual Del Propietário página 13

INSTALLATION INSTRUCTIONS
Install the chassis into the cabinet
1. Carefully slide the chassis into the cabinet. Do
not push on the controls or the coils. Ensure that
the chassis is fi rmly seated toward the rear of the
cabinet.
2. Replace the shipping screws on the top of the
cabinet.
3. Replace the front face of the appliance.
4. Secure the front face of the cabinet with the four
screws that were removed earlier.
5. Replace the front panel and the air fi lter.
Note: Do not operate the appliance without the air
fi lter installed.
Install the Foam Inserts
The foam inserts can block any cracks or spaces
in the side curtains and help maintain the energy
effi ciency of the appliance.
After the appliance is installed in the window,
measure the width of the side curtains from the side
of the appliance to the edge of the curtain.
If necessary, cut the foam insert to the correct size
and then slide the foam insert into the slots in the
side curtain. The supplied weather stripping can
be used to block any other cracks or spaces as
required.
1
2
3
4
5
12