Fanimation EASTVIEW LP8074SLAZ Manual Del Usuario página 12

How to Operate Your Ceiling Fan
4. Your remote is programmed at the factory and ready
for use. If you need to reprogram your remote or
program a new remote, shut off power to your fan, then
restore power. Within 30 seconds of restoring power,
press the learn button inside the battery compartment
and hold for 3 seconds. The light will blink twice and
fan running. The remote will now be programmed to
your fan and ready for use. (Figure 4)
5. Remote functions: (Figure 5)
Turns fan on and turns speed up.
Turns fan on and turns speed down.
Increases light output level.
Press and fan and light will turn off after 1 hour.
Press and fan and light will turn off after 3 hours.
Press and fan and light will turn off after 6 hours.
6. and
For this fan, switch should be in the
allowing for dimming of the light. (Figure 6 )
7. If airflow is desired in the opposite direction,
turn the fan off and wait for the blades to stop turning.
the opposite position and turn fan on again. (Figure 7)
Reverse Switch Information
Clockwise
Winter Counter-Clockwise
LEARN
position,
O
Dip Switch
Right
12
(continued)
Figure 4
Figure 5
D
Figure 6
Figure 7
Reversing