Translation of the original instructions
EN
GYSPACK 660 / 750
SAFETY INSTRUCTIONS
This manual includes guidelines on the operation of your device
and the precautions to follow for your own safety. Ensure it is read
carefully before first use and keep it handy for future reference.
These instructions should be read and understood before anyone
operates the product. Any modifications or maintenance that are not
specified in the manual should not be undertaken. The manufacturer
is not liable for any injury or damage due to non-compliance with
the instruction manual. In case of problems or uncertainties, please
consult a qualified person that is able to handle the device correctly.
This device should only be used for start-up and / or power supply
within the limits indicated on the device and in the manual. The
safety instructions must be followed. In case of improper or unsafe
use, the manufacturer cannot be held responsible.
Device suitable for indoor use only. Do not expose to rain or
excessive moisture.
This device may be used by children from age 8 and by persons
with reduced physical, sensory or mental capabilities or lack of
experience and knowledge, provided that they are under supervision
or have been told how to use the device safely and are aware of
the potential risks. Children must not use the device as a plaything.
Cleaning and servicing tasks may not be carried out by children
unless they are supervised.
Do not use for charging non-rechargeable batteries.
Do not use any charger other than the one supplied with the machine
to charge the batteries.
Do not operate the device with a damaged power supply cord or a
damaged mains plug.
Never charge a frozen or damaged battery.
Do not cover the device
Do not place the device near a fire or subject it to heat or to longterm
temperatures exceeding 50°C
Do not obstruct the cooling vents. Refer to the installation section
before operating the machine.
The automatic mode of operation and usage restrictions are
explained below in these operating instructions.
Risk of explosion or acid projection in case of short-circuit of the
clamps or if the 12V booster is connected to a 24V vehicle or vice
versa.
Risk of explosion and fire!
A battery being charged can emit explosive gas.
• During the charge, the battery must be placed in a well ventilated
area.
• Avoid flames and sparks. Do not smoke.
• Protect the electrical contacts of the battery against short-circuiting.
9